Dataman 448PRO2 User Manual page 33

DATAMAN-48PRO2 / DATAMAN-48PRO2C
Jam files of JEDEC standard JESD-71 are interpreted by Jam Player. Jam files are
generated by design software which is provided by manufacturer of respective programmable
device. Chips are programmed in ZIF or through ISP connector (IEEE 1149.1 Joint Test Action
Group (JTAG) interface).
VME files are interpreted by VME Player. VME file is a compressed binary variation of SVF file
and contains high-level IEEE 1149.1 bus operations. VME files are generated by design
software which is provided by manufacturer of respective programmable device. Chips are
programmed in ZIF or through ISP connector (IEEE 1149.1 Joint Test Action Group (JTAG)
interface). Multiple devices are possible to program and test via JTAG chain: JTAG chain (ISP-
Jam) or JTAG chain (ISP-VME).
Attaching of more DATAMAN-48PRO2 / DATAMAN-48PRO2C programmers to the same PC
(through USB port) is achieved a powerful multiprogramming system, which support as
many chips, as are supported by DATAMAN-48PRO2 / DATAMAN-48PRO2C
programmer and without obvious decreasing of programming speed. It is important to know,
there is a concurrent multiprogramming - each programmer works independently and each
programmer can program different chip, if necessary.
It is important to remember that in most cases new devices require only a software update
due to the DATAMAN-48PRO2 / DATAMAN-48PRO2C is truly universal programmer. With our
prompt service you can have new devices can be added to the current list within hours!
Advanced design including protection circuits, original brand components and careful
manufacturing and burning allows us to provide a three year warranty on parts and labour for
the DATAMAN-48PRO2 and DATAMAN-48PRO2C (limited 25,000 cycle warranty on ZIF
socket).
33