Dataman 448PRO2 User Manual page 114

Port - selects a port, which will be scanned for a requested programmer. If All port is selected,
the control program scans all ports, which are available on standard addresses.
Pressing key <Enter> or button OK initiates scanning for programmer by set parameters.
There is same activity as at start the control program. The command clears a list of default
devices without the current device, if the new selected programmer supports this one.
This setting is saved to disk by command Options / Save options.
Programmer / Refind programmer
This menu command is used to refind (reestablish communication with) currently selected
programmer.
To select other type of programmer, programmer communication parameters and to establish
communication with newly selected programmer use menu Programmer / Find programmer.
Programmer / Handler
In dialog Handler a Handler type and Handler communication parameters can be set. Handler
is an external device for special control of device operations in control program. When None
Handler is selected, this means default state of control program, i.e. device operations are
controlled directly by user otherwise control program is in special mode, when device
operations are controlled automatically with co-operation with Handler.
Dialog Handler contains following items:
Selected Handler
Search at port
Pressing key <Enter> or button OK initiates scanning for Handler by set parameters. If
selected Handler type is None, no Handler scanning will be processed. Current Handler
settings are saved to configuration file by command Options / Save options or when control
program is closed.
Handler is not available for sale.
Programmer / Credit box info
The menu item Credit box info provide all necessary information about Credit box(es) attached
to the PC: type, serial number, information about activation and about credits available. If more
Credit boxes attached to the PC, software shows also information about all credits available.
Availability of Credit box(es) and also information about amount of credits in attached Credit
box(es) is also shown at main window, it is 'Credit box' button below the 'Statistics' and 'Count
down' section. This button appears dynamically, when the device that belongs to 'Paid ISP
support' is selected and if at least one Credit box is present.
The bar-graph at the bottom of 'Credit box' button also indicates status of credits on attached
Credit box(es) as next:
Green bargraph
yellow bargraph
select wished Handler type.
select a COM port, which will be scanned for a requested Handler.
85% of total credits available
credit box button 50% of total credits available
114