Dataman 448PRO2 User Manual page 118

Sequence for testing 6 pins ISP connector:
1. Insert Diagnostic pod for ISP connectors into ZIF socket of the programmer. Diagnostic
pod for ISP connectors must be inserted as 40 pins device.
2. Interconnect 6 pins connector of Diagnostic pod for ISP connectors with an ISP connector
of the programmer with an ISP cable, included in programmer delivery package. Be sure
that pins are interconnected properly (i.e. 1-1, 2-2... 6-6).
3. Run selftest of ISP connector in PG4UW (Programmer / Selftest ISP connector...).
Sequence for testing 10 pins ISP connector:
1. Insert Diagnostic pod for ISP connectors into ZIF socket of the programmer. Diagnostic
pod for ISP connectors must be inserted as 40 pins device.
2. Interconnect 10 pins connector of Diagnostic pod for ISP connectors with an ISP connector
of the programmer with an ISP cable, included in delivery programmer package. Be sure
that pins are interconnected properly (i.e. 1-1, 2-2, 10-10).
3. Run selftest of ISP connector in PG4UW (Programmer / Selftest ISP connector...).
Diagnostic pod for ISP connectors #2 is used for testing 20 pins ISP connector of
programmers. Diagnostic pod for ISP connector #2 is available as standard accessory for
DATAMAN-448PRO2, DATAMAN-48PRO2 and DATAMAN-48PRO2C. The order number: 70-
0680.
Schematics of Diagnostic pod for ISP connectors #2 (if you are in hurry):
Sequence for testing 20 pins ISP connector:
1. Insert Diagnostic pod for ISP connectors #2 into ZIF socket of the programmer. Diagnostic
pod for ISP connectors #2 must be inserted as 48 pins device.
2. Interconnect 20 pins connector of Diagnostic pod for ISP connectors #2 with an ISP
connector of the programmer with an ISP cable, included in delivery programmer package.
Be sure that pins are interconnected properly (i.e. 1-1, 2-2... 20-20).
3. Run selftest of ISP connector in PG4UW (Programmer / Selftest ISP connector...).
We recommend run this test every 6 months.
118