Dataman 448PRO2 User Manual page 76

Note: Option Require project file unique ID before first programming is replacement of former
Require project file checksum before first programming. Unique ID advantage over generic
checksum is that unique ID is calculated not just from main device buffer data, but also from
secondary buffers data used by device and available device settings. When the request of
project file checksum is active, the software indicates this by label (CSum) next to project file
name in bottom status line in control program main window. This option is no longer available
in Save project dialog, but it can be activated after loading of older project file, that has the
checksum request set on.
File / Reload file
Choose this option to reload a recently used file.
When you use a file, it is added to the Reload file list. Files are listed in order depending on
time of use of them. Lastly used files are listed before files used far off.
To Reload a file:
1. From the File menu, choose Reload file.
2. List of lastly used files is displayed. Click the file you want to reload.
Note: When reloading a file the file format is used, by which the file was lastly loaded/saved.
File / Reload project
Choose this option to reload a recently used project.
When you use a project, it is added to the Reload project list. Projects are listed in order
depending on time of use of them. Lastly used projects are listed before projects used far off.
To Reload a project:
3. From the File menu, choose Reload project.
4. List of lastly used projects is displayed. Click the project you want to reload.
File / Project options
This option is used for display/edit project options of actually loaded project. Project options
mean basic description of project including following project data:
device name and manufacturer
project creation date
user defined project description (arbitrary text), e.g. project author and other text data for
more detailed project description
User can directly edit user defined project description only. Device name, manufacturer,
project date and program version are generated automatically by program.
File / Load encryption table
This command loads the data from binary file from disk and it saves them into the part of
memory, reserved for an encryption (security) table.
76