Epson EF-100WATV, EF-100BATV, V11H914320 - Portable Projector with Android TV Quick Setup Guide Manual

Epson EF-100WATV, EF-100BATV, V11H914320 - Portable Projector with Android TV Quick Setup Guide Manual

Also See for EF-100WATV:

Advertisement

Epson EF-100WATV, EF-100BATV, V11H914320 - Portable Projector with Android TV Quick Setup Guide Manual

Contents

Make sure your projector box includes all of these parts:

You can place the projector on almost any flat surface. See the online User's Guide for more information.

Connect the projector

Streaming device

Connect the included Android TV streaming device to your projector. To stream content, make sure you have an active streaming account and enter your login information as necessary for each app.

warning Note: To connect other streaming devices, see the online User's Guide for more information. The projector's HDMI port does not support MHL®.

  1. Remove the rear cover of the projector.
    Streaming device - Step 1
  2. Open the USB power cable clamp.
    Streaming device - Step 2
  3. Connect the streaming device to the projector's HDMI extension cable.
    Streaming device - Step 3
  4. Connect the USB power cable to the streaming device and fit the device securely inside the projector.
    Streaming device - Step 4

    Do not force the device into the projector; you may damage the projector and/or the device.
  5. Make sure the device is securely connected as shown below. Pass the USB power cable through the clamp, then close the clamp to secure the cable.
    Streaming device - Step 5
  6. Replace the rear cover of the projector.
    Streaming device - Step 6

warning Note: To pair a Bluetooth® speaker or to connect an external speaker or headphones to your projector, see the online User's Guide.

External video source

You can connect an external video source with an HDMI cable (not included).


Do not turn on the video source before connecting it to the projector; you may damage the projector.

warning Note: Some external video sources may require an optional HDMI adapter cable.

  1. Remove the rear cover of the projector.
    External video source - Step 1
  2. Connect an HDMI cable to your video source's HDMI output port.
  3. Connect the other end of the HDMI cable to the projector's HDMI extension cable.
    External video source - Step 2
  4. Pass the HDMI cable through the cable path as shown.
    External video source - Step 3
  5. Replace the rear cover of the projector.
    External video source - Step 4

Turn on the projector

  1. Plug in the projector.
    Turn on the projector - Step 1
  2. Press the power button on the projector or the projector remote control. The power light flashes blue, then stays on.
    Turn on the projector - Step 2
  3. Press the Enter button on the projector remote control to scroll through the Welcome Guide. To use Android TV and video-on-demand features, press and hold the home and Enter buttons to pair the remote control to the projector.
  4. The default language of the menu system is English. To select another language, press the menu button on the projector remote control. Select Settings and press Enter. Select Language and press Enter. Select your language and press Enter. Press the menu button to exit.

warning Note: To shut down the projector, press the power button on the projector or the projector remote control, then press the button again to confirm, if necessary.

Adjust the image

  1. Move the focus lever on top of the projector left or right to adjust the image sharpness.
    Adjust the image - Step 1
  2. To adjust the image height, press and hold the foot release lever on the bottom of the projector to extend the front adjustable foot. Release the lever to lock the foot in the desired position.
    Adjust the image - Step 2

Using the projector remote control

Install the batteries
Install the batteries as shown (two AAA batteries).

Remote control

warning Note:

  • You must pair the projector remote control to the projector to use Android TV and video-on-demand features. See the online User's Guide for more information.
  • The remote control for Android TV is only used to control the streaming device if it is connected to a different device or projector. See the online User's Guide for more information.

Troubleshooting

  • If you see a No signal message after turning on the projector, check the following:
    • Make sure the streaming device is properly connected to the HDMI extension cable and the USB power cable.
    • For external video sources, make sure an HDMI cable is properly connected to the projector's HDMI extension cable.
  • If you see a blank screen, check the following:
    • Make sure the power light on the projector is blue and not flashing.
    • Press the power button to wake the projector from standby or sleep mode, if necessary.
  • If you see a blank screen when a computer is connected, check the following:
    • On some Windows® laptops, you may need to hold down the Fn key and press F7 or the function key that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as .
      On Windows 7 or later, hold down the Windows key and press P at the same time, then click Duplicate.
    • If you're using a Mac laptop, open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox.
  • If the projector does not respond to remote control commands, make sure the batteries in the remote control are installed correctly. Replace the batteries if necessary.
  • The projector's USB power cable can provide 2.0A of power. Make sure your streaming device supports this specification.

Registration

Register today to get product updates and exclusive offers. You can register online at http://epson.com/webreg.

Where to get help

Internet support

Visit http://epson.com/support (U.S.) or http://epson.ca/support (Canada) and search for your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson.

Telephone support services

To use the Epson® PrivateLine® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
Support hours are 7 am to 4 pm, Pacific Time, Monday through Friday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Optional accessories

You can purchase accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at http://epsonstore.com (U.S. sales) or http://epsonstore.ca (Canadian sales).

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Epson EF-100WATV, EF-100BATV, V11H914320 - Portable Projector with Android TV Quick Setup Guide Manual

Advertisement

Need Assistance?

Do you have a question about the EF-100WATV that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents