Epson EF11, V11HA23020 - Portable Projector Quick Setup Guide Manual

Contents

Make sure your projector box includes all of these parts:

You can place the projector on almost any flat surface or attach it to a tripod or other hardware with an optional mount. See the online User's Guide for more information.

Connect the projector

Video device or computer

You can connect video equipment or a computer. Connect one end of an HDMI cable to the projector's HDMI port and the other end to an HDMI port on your video device or computer. You can also connect a streaming stick. See the online User's Guide for details.

Do not turn on the video source before connecting it to the projector; you may damage the projector.

USB device

You can connect a supported digital camera, USB flash drive, or USB storage device to the projector's USB-A port, and then use the projector's PC Free feature. See the online User's Guide for details.

Screen mirroring

You can use Miracast^® to send images to your projector from supported smartphones, tablets, and laptops. See the online User's Guide for details.

Connect audio

Built-in speaker

The projector has a built-in speaker that can play audio from a video source connected by an HDMI cable.

Headphones

You can connect the projector to headphones through the audio out port.

Note: Connecting headphones disables the projector's internal speaker. If you do not hear sound from an HDMI source, set the connected device to PCM output.

Turn on your equipment

1. Turn on your computer or video source.
2. Plug in the projector.
   
3. Press the power button on the projector or the remote control. The status light flashes blue and then stays on.
   
4. Press the Enter button on the remote control to scroll through the Welcome Guide.
5. The default language of the menu system is English. To select another language, press the menu button on the remote control. Select Settings and press Enter. Select Language and press Enter. Select your language and press Enter. Press the menu button to exit the menu system.

Note: To shut down the projector, press the power button twice.

Adjust the image

1. To reduce or enlarge the image, press the menu button on the remote control. Select Settings and press Enter. Select Installation, select Zoom, and press Enter. Press the left or right arrow buttons on the remote control to adjust the image size, then press Enter. Press the menu button to exit the menu system.
2. To adjust the image height, press and hold the foot release lever on the bottom of the projector to extend the front adjustable foot. Release the lever to lock the foot in the desired position.
   
3. Move the focus lever on top of the projector left or right to adjust the image sharpness.
   
4. If your image looks like or , you may have placed the projector off to one side of the screen at an angle. Place the projector directly in front of the center of the screen, facing the screen squarely. If you can't move the projector, use the button on the remote control to correct the image shape.
5. Your projector automatically adjusts an image that looks like or , but if necessary you can press the button on the remote control to correct it.

Note: For more adjustment methods, see the online User's Guide.

Using the remote control

Install two AAA batteries as shown below.

Troubleshooting

• If you see a blank screen, check the following:
  • Make sure your computer or video device is properly connected.
  • Make sure the status light on the projector is blue and not flashing.
  • Press the power button or the button on the projector or remote control to wake the projector from standby or sleep mode, if necessary.
• If you see a blank screen when a computer is connected, check the following:
  • On some Windows^® laptops, you may need to hold down the Fn key and press F7 or the function key that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as .
    On Windows 7 or later, hold down the Windows key and press P at the same time, then click Duplicate.
  • If you're using a Mac laptop, open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox.
• If the projector does not respond to remote control commands, make sure the batteries in the remote control are installed correctly. Replace the batteries, if necessary.

Registration

Register today to get product updates and exclusive offers. You can register online at www.epson.com/webreg.

Where to get help

Internet support

Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and search for your product to download software and utilities, view the manual, get FAQs and troubleshooting advice, or contact Epson.

Telephone support services

To use the Epson^® PrivateLine^® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and 7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Optional accessories

For a list of optional accessories, see the online User's Guide.
You can purchase screens or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epsonstore.ca (Canadian sales).

Documents / Resources

References

• Epson Product Registration
• Epson® Official Support
• Epson® Official Support
• Buy Direct from Epson | Epson US
• Buy Direct from Epson | Epson Canada

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Epson EF11, V11HA23020 - Portable Projector Quick Setup Guide Manual