Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
OPERATION
Idling Stop Guidance
If no operation is performed for more than 5 minutes, and the
engine is idling, the idling stop message is displayed on the
monitor. When waiting for work or taking short break, stop the
engine to reduce unnecessary fuel consumption.
The idling stop message goes out if any lever is operated again
or switch F5 is pressed.
Guidance To Avoid Hydraulic Relief
If the hydraulic oil is kept relieved for more than 3 seconds dur-
ing operation, the hydraulic relief deterrence message is dis-
played on the monitor.
The hydraulic relief deterrence message goes out 10 seconds
later or when switch F5 is pressed.
E Mode Recommendation Guidance
If light-load work is continued for more than 10 minutes in P or
ATT/P mode, E mode recommendation message is displayed.
When working on light load, set the working mode to E to re-
duce unnecessary fuel consumption.
E mode recommendation message goes out more than 10 sec-
onds after or when switch F5 is pressed.
Reduce Travel Speed (Recommended) Guidance
If the machine keeps traveling for more than 2 minutes with the
travel mode Hi and the fuel control dial at the High idle (MAX)
position, the travel partial mode recommendation message is
displayed. When traveling for a long time, the fuel consumption
can be reduced by lowering the fuel control dial.
The travel partial mode recommendation message goes out
more than 10 seconds after or when switch F5 is pressed.
3-38
Advertisement
Table of Contents
