OPERATION
Operation of one camera image display screen
Operate the following for the method of operation when it is desired to display only one camera image on the
monitor.
•
On the standard screen, when switch F3 is pressed, No. 1
camera image is displayed in full-screen.
•
Display of camera image is changed each time switch F1
is pressed.
1.
No. 1 camera image is displayed in full-screen.
2.
No. 2 camera image is displayed in full-screen.
3.
No. 3 camera image is displayed in full-screen.
4.
No. 1 and No. 2 camera images are displayed simulta-
neously.
•
When switch F1 is pressed on the screen that displays No.
1 and No. 2 camera images simultaneously, it returns to
the screen that displays No.1 camera image in full-screen.
REMARK
If the machine is equipped with No.1 camera only, No. 2 camera image to No.4 camera image are not dis-
played. No.1 camera image only is displayed in full-screen. If the machine is not equipped with No.3 camera,
display is changed each time switch F1 is pressed, but No.3 camera image is not displayed.
•
Press switch F3, and the screen returns to the standard
screen.
Operation of image display screen when two camera images are shown simulta-
neously
On the one camera image display, when switch F4 is pressed,
No.1 camera image (d) and No. 2 camera image (e) are dis-
played simultaneously.
•
Even if 3 cameras are installed, only the images from the
No. 1 camera and the No. 2 camera can be displayed at
the same time.
•
When 2 images are displayed at the same time, the dis-
play changes more slowly than when only one image is
displayed.
EXPLANATION OF COMPONENTS
3-53