Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
When the degree of emergency is high
•
KDPF soot accumulation caution lamp (2) lights up in red
and the action level "L03" lights up in red (3).
•
If the lock lever is set to LOCK position or all the work
equipment control levers are set in NEUTRAL, the screen
changes to "Aftertreatment Devices Regeneration" screen
(C) after 3 seconds. Then, the "Aftertreatment Devices Re-
generation" screen (C) and standard screen (D) are auto-
matically displayed alternately according to the lever oper-
ation, until the manual stationary regeneration is per-
formed.
•
If KDPF soot accumulation caution lamp (2) lights up in
red, immediately stop the machine in a safe place and per-
form the manual stationary regeneration.
PROCEDURE FOR MANUAL STATIONARY REGENERATION
k
k
Exhaust gas temperature may increase higher than the
previous models during the aftertreatment devices regen-
eration. Avoid getting near the exhaust pipe outlet and
around the Aftertreatment devices to prevent being burnt.
Also, keep combustible materials away from the exhaust
pipe outlet and around the Aftertreatment devices to pre-
vent a fire.
The manual stationary regeneration can be performed while
KDPF soot accumulation caution lamp (1) is lit.
1.
Move the machine to a safe place and stop it with engine
running.
2.
Check that there is no person or combustible matter
around the machine (particularly in the direction of the ex-
haust gas flow).
3.
Operate the control grip (g) of the lock lever to set it se-
curely to LOCK position (L).
3-116
CAUTION
OPERATION
Advertisement
Table of Contents
