Table of Contents
Advertisement
TRANSPORTATION
METHOD FOR SECURING MACHINE WITHOUT TIE-DOWN POINT
Place blocks under both ends of the tracks to prevent the ma-
chine from moving during transportation, and secure the ma-
chine with chains or wire ropes of suitable strength. In particu-
lar, fix the machine securely to prevent it from slipping side-
ways.
METHOD FOR REMOVING AND INSTALLING MIRROR
If they are to be removed for shipment, or are to be installed again, perform the following procedure.
After installation of mirror, always adjust it. For details, see
"METHOD FOR ADJUSTING MIRRORS (3-159)".
METHOD FOR REMOVING MIRROR
Mirrors (A), (B)
1.
Loosen mounting bolt (2), then remove mirror (1) from sup-
port (3).
2.
Loosen bolt (4) and remove support (3) and clamp (5) from
the handrail.
Mirror (C)
Loosen mounting bolt (2), then remove mirror (1) from support
(3).
3-242
OPERATION
Advertisement
Table of Contents
