Table of Contents
Advertisement
OPERATION
METHOD FOR INSTALLING CLIMBING HANDLE
Install handle (A) and tighten it with bolts (1).
METHOD FOR REMOVING AND INSTALLING REVOLVING LAMP
METHOD FOR REMOVING REVOLVING LAMP
Remove the revolving lamp according to the following procedure.
1.
Remove connector (A) of the revolving lamp.
When removing the connector, pull it out while pressing
the claw in the center of the connector.
2.
Place the connector for wiring (B) in a clean vinyl bag or
the like to protect it from water, etc. during transportation
and fix it to the operator's cab with sealing tape or the like.
3.
Tilt down lock (D) of revolving lamp bracket (C).
TRANSPORTATION
3-245
Advertisement
Table of Contents
