Table of Contents
Advertisement
OPERATION
•
The regular position of the mirror is as follows:
Adjust mirror (13).
Tightening torque of mounting bolt (12): 6.0 to 7.0 Nm{0.61
to 0.71 kgm}
Mounting angle (14): 20 °
Mounting position (15): 22 mm
METHOD FOR ADJUSTING REAR VIEW CAMERA ANGLE
k
k
•
Always adjust the camera before starting work. If it is
not adjusted properly, you cannot secure the visibility
and a serious personal injury or death may result.
•
When adjusting the angle of the camera, prepare a
scaffold first in order to provide a safe working plat-
form.
If you try to work standing on the counterweight, there
is a danger of serious injury or death due to falling off
from the machine.
WARNING
MACHINE OPERATIONS AND CONTROLS
3-165
Advertisement
Table of Contents
