Komatsu PC360NLC-11 Operation & Maintenance Manual page 179

Hydraulic excavator
Table of Contents

Advertisement

OPERATION
3.
Grip right and left handles (A), and pull down lever (B) to
release the lock.
4.
Grip the handle (C) at the bottom of the front window with
your left hand and the handle (D) at the top with your right
hand, push the window to the front, then lower it slowly.
REMARK
The handles (A) on the right and left top sides of the front
window are not for pulling up and down the window. Do not
pull down the front window with the handles (A).
5.
When the bottom of the window reaches the top of lower
side window, push the top of the window to the front to
push it against right and left lock catches (G) and engage
the lock.
6.
Check that lever (B) is securely at LOCK position.
If the arrow on lock case (F) matches the position of
the arrow on lever (B), the lock is engaged. Check vis-
ually.
If the arrow on lock case (F) does not match the posi-
tion of the arrow on lever (B), the lock is not engaged.
Repeat the operation in step 5 to engage the lock.
EXPLANATION OF COMPONENTS
3-103

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pc360lc-11

Table of Contents