OPERATION
At this time, insert revolving lamp bracket (C) into the re-
volving lamp fixing claw side of base bracket (E), and in-
stall it.
2.
Install the hook of lock (D) to base bracket (E).
3.
Raise the lever of lock (D).
REMARK
If the reaction force of lock (D) is large, try it again by shift-
ing bracket (C).
4.
Insert connector (A).
Securely insert the connector until it clicks.
PROCEDURES FOR UNLOADING MACHINE
Perform unloading of the machine on a firm, level ground.
Maintain a safe distance from the road shoulder
TRANSPORTATION
3-247