Table of Contents
Advertisement
ATTACHMENTS AND OPTIONS
This table lists the combination of attachments which can be installed to the long arm (standard) and
short arm.
○: Can be used, △: Can be used only for light duty work, ×: Cannot be used Mark: Equipped with side
cutter
Model
* Narrow bucket
* Narrow bucket
* Standard bucket
* Light duty bucket
Light duty bucket
* Rock bucket
Ripper bucket
INSTALL ATTACHMENT
Depending on the type or combination of work equipment, there is a danger that the work equipment
may hit the cab or machine body.
When using unfamiliar work equipment for the first time, check before starting if there is any danger of
interference, and operate it with care.
Categories of use
Select a proper attachment for each use.
General digging
Digging or loading sand, gravel, clay etc.
Light duty digging
Digging and loading dry and loose sandy soil, or muddy soil.
Loading
Loading of dry and loose earth.
REMARK
For digging or loading hard soil or soft rock, it is recommended that the strengthened bucket with high durability
and high wear resistance be employed.
Combination of attachments
NOTICE
1. Bucket size based on ISO 7451, heaped material with a 1:1 angle of repose.
2. Max Bucket Volume/Weight are for reference only and are not necessarily available from the factory.
3. Table is based on General Purpose buckets and both conditions of Volume (m
exceeded.
Opening
Capacity
width
3
m
mm
0.52
610
1.14
1145
1.4
1340
1.6
1515
1.8
1700
1.4
1458
0.9
950
k
k
Standard
Use
Arm
3.2 m
Narrow dig-
○
ging
Narrow dig-
○
ging
General dig-
○
ging
△
Loading
△
Loading
For digging
○
soft rock
Digging
○
rocks
WARNING
ATTACHMENTS AND OPTIONS
6500 mm standard boom
Short
Ultra short
Arm
Arm
2.55 m
2.2 m
○
○
○
○
○
○
△
△
△
△
○
○
○
○
3
) and Weight (kg) must not be
Long
Arm
4.0 m
○
○
△
×
×
×
×
6-59
Advertisement
Table of Contents
