EXPLANATION OF COMPONENTS
CAMERA IMAGE SELECTOR SWITCH
On the standard screen, you can select a display only for the
camera image or a display only for the meter by pressing
switch F3.
Operation of camera image display screen
Operate the following for changing the camera image display on the monitor.
•
On standard screen LL, the camera image is always displayed on the left part of the monitor.
•
On standard screen LL, when switch F3 is pressed, camera image full-screen display MM is displayed.
Camera image full-screen display MM is displayed on the entire screen.
•
When switch F3 is pressed on camera image full-screen display MM, message screen NN is displayed and
no camera image is displayed.
•
On message screen NN, when switch F3 is pressed or when no switch is operated for 10 seconds, stand-
ard screen LL is displayed.
•
On message screen NN, when switch F5 is pressed, the message disappears and meter display screen AA
is displayed.
For the safety, display the camera image during travel.
3-52
OPERATION