Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
MAINTENANCE SCREEN SETTING
Each item of setting menu (e) on "Maintenance" screen is used
for displaying and setting the notification relevant to mainte-
nance.
The items on Maintenance display are as follows.
a
Air Cleaner Clean or Change
Coolant Change
Hydraulic Oil Additional Filter Change
Hydraulic Oil Pilot Filter Change
Engine Oil Change (*1
Engine Oil Filter Change (*1
Fuel Prefilter Change
Fuel Main Filter Change
Hydraulic Tank Breather Change
Hydraulic Oil Filter Change
Damper Case Oil Check/Refilling
Swing Machinery Case Oil Change
DEF Breather Change
Final Drive Case Oil Change
DEF Filter Change
KCCV Filter Change
KDPF Filter Cleaning
DEF Tank Washing
Fuel Doser Cleaning
Hydraulic Oil Change
a: Maintenance items
b: Default maintenance interval settings (h)
c: Time remaining until maintenance (h)
*1:
When using engine oil for cold district, the maintenance interval setting must be changed. For details of the oil,
see "RECOMMENDED FUEL, COOLANT, AND LUBRICANT (7-5)".
On "Maintenance" menu screen, it is possible to perform the
following operations with switches F1 to F6.
F1, F2: Moves to the right and left menus.
F3: Moves to the next item (1 line below). When on the last
line, it moves to the first line.
F4: Moves to the previous item (1 line above). When on the
first line, it moves to the last line.
F5: Returns the screen to the standard screen.
F6: If this switch is kept pressed, the screen changes to the
screen for resetting the remaining time to the maintenance
for the selected item.
3-76
b
-
-
-
-
500
500
500
1000
1000
1000
1000
1000
1000
2000
2000
2000
4500
4500
4500
5000
OPERATION
Advertisement
Table of Contents
