Landoll Coulter Chisel 2112 Operator's Manual page 67

34" HARNESS
EXTENSIONS
LIGHT BRACKET ASSEMBLY RH,
LIGHT MOUNT PLATE,
1/2 X 4-1/2 BOLTS,
1/2 FLAT WASHERS
1/2 LOCK NUTS
NOTE: REAR HARNESS
THROUGH LIGHT BRACKET
ASSEMBLY TUBE RH
MAIN
HARNESS
STORE-
A-WAY
HARNESS
FRONT
TAIL LIGHT MOUNT,
MOUNT BRACKET,
1/2 X 10 BOLTS,
1/2 FLAT WASHERS,
1/2 LOCK NUTS
NOTE: ROUTE MAIN HARNESS
TO FRONT OF MACHINE WITH
HYDRAULIC HOSES THROUGH
ALL CLAMPS ON HITCH ASSEMBLY
7-PIN CONNECTOR
TO TRACTOR
Figure 3-18: LED Light Installation
ASSEMBLY INSTRUCTIONS
RED AG LAMP,
REFLECTOR MOUNT,
1/4 X 1-1/2 BOLTS,
LOCK NUTS
AG FLASHER
CONTROL MODULE,
1/4 X 1-1/2 BOLTS,
1/4 LOCK NUTS
RED AG LAMP,
REFLECTOR
MOUNT,
1/4 X 1-1/2 BOLTS,
LOCK NUTS
REAR
HARNESS
LIGHT BRACKET ASSEMBLY LH,
LIGHT MOUNT PLATE,
1/2 X 4-1/2 BOLTS,
1/2 FLAT WASHERS
1/2 LOCK NUTS
NOTE: USE TIE STRAPS
AS NEEDED TO KEEP
WIRING HARNESS'S
CLEAR OF MOVING PARTS
NOTE: REAR HARNESS
THROUGH LIGHT BRACKET
ASSEMBLY TUBE LH
AMBER AG LAMP,
1/4 X 1-1/2 BOLTS,
LOCK NUTS
3-29