Configuring Ddns Settings; Configuring Motion Detection Settings - FLIR Digimerge D33084T Instruction Manual

Remote Viewing Interface
• SMTP Server: Enter your SMTP Server.
• Sender Email: Enter the sender email address. This can be any address of your choice.
• Sender Password: Enter your email server's password.
• Receiver Email: Enter the recipient's email address.
• Interval: Enter the interval the DVR waits before sending a new email notification.
4 Click Save to save your settings.

Configuring DDNS Settings

To configure DDNS settings:
1 Click the Remote Setting tab, and click DDNS.
2 Configure the following:
• DDNS: Select Enable or Disable.
• In the Server drop-down menu, select FLIRDDNS.
• Domain Name: Enter your Domain name/URL Request from the confirmation email that was
sent after you created your DDNS account.
• User name: Enter your DDNS User Name that was emailed to you after DDNS registration.
• Password: Enter your DDNS Device password that was emailed to you after DDNS registration.
3 Click Save to apply your settings.

Configuring Motion Detection Settings

To configure motion settings:
1 Click the Remote Setting, and click Alarm>Motion.
2 Configure the following motion recording parameters:
• Channel: Select the channel you wish to apply the settings to.
• Enable: Select this checkbox to enable motion recording.
• Sensitivity: Select the desired motion detection sensitivity. The greater the value, the greater
the motion sensitivity.
72