Configuring Ddns Settings - FLIR M6100 Series Instruction Manual

14 Using the Main Menu
If you are using DDNS connectivity, port forwarding is required for the HTTP Port (default:
80) and TCP (Client Port) (default: 35000).
To configure system ports:
1. From the Main Menu, click and then select Network>Connection.
2. Configure the ports as needed and click OK to save changes.
NOTE
Up to 3 devices may connect to the system at the same time when using FLIR Cloud™.

14.3.4 Configuring DDNS Settings

FLIR DDNS is available as an optional connectivity option. Please see 18 DDNS Setup
(Advanced), page 146 for details.
The primary connectivity option uses FLIR Cloud™ to connect to your system over the In-
ternet without requiring port forwarding or DDNS registration. For details, see 15 Connect-
ing to Your System Over the Internet on PC or Mac, page 75.
To configure DDNS Settings:
1. Visit http://ddns.myddns-flir.com and register for a DDNS account.
53
#LX400100; r.46796/46796; en-US