Configuring Ddns Settings; Configuring Email Alerts - FLIR DNR700 Series Instruction Manual

14 Using the Main Menu

14.3.4 Configuring DDNS Settings

FLIR DDNS is available as an optional connectivity option. Please see 20 DDNS Setup
(Advanced), page 157 for details.
The primary connectivity option uses FLIR Cloud™ to connect to your system over the In-
ternet without requiring port forwarding or DDNS registration. For details, see 15 Connect-
ing to Your System Over the Internet on PC or Mac, page 79.
To configure DDNS Settings:
1. Visit http://ddns.myddns-flir.com
2. From the Main Menu, click
3. Check Enable.
4. Under Domain Name, enter the Domain Name/URL Request your received in the
email after registering for DDNS.
5. Under User ID, enter your DDNS User Name.
6. Under Password, enter your DDNS Device password.
7. Click OK to save your settings.
NOTE
Please allow 10~15 minutes for the DDNS servers to update with your new DDNS address before at-
tempting to connect.

14.3.5 Configuring Email Alerts

You can configure the system to send out email alerts for motion detection or other events.
NOTE
To send out motion detection alerts, you must enable the Send Email option for motion detection on each
camera you would to receive alerts from. For details, see 14.3.8 Configuring Motion Detection, page 59.
NOTE
SMTP server connection information is required to set up email alerts. Contact your email service pro-
vider to retrieve your SMTP server information.
#LX400082; r. 1.0/38226/38226; en-US
and register for a DDNS account.
and then select Network>DDNS.
57