Configuring System Ports (Connection); Configuring Ddns Settings - FLIR DN4083E64 Instruction Manual

15 Using the Main Menu

15.3.3 Configuring System Ports (Connection)

The Connection menu allows you to configure ports used by the system. Please note that
port forwarding is not required to use FLIR Cloud™ or to connect using the apps.
If you are using DDNS connectivity, port forwarding is required for the HTTP Port (defaut:
80) and TCP (Client Port) (default: 35000).
To configure system ports:
1. From the Main Menu, click
2. Configure the ports as needed and click OK to save changes.
NOTE
Up to 3 devices may connect to the system at the same time when using FLIR Cloud™.

15.3.4 Configuring DDNS Settings

FLIR DDNS is available as an optional connectivity option. Please see 20 DDNS Setup
(Advanced), page 139 for details.
The primary connectivity option uses FLIR Cloud™ to connect to your system over the
Internet without requiring port forwarding or DDNS registration. For details, see 16 Con-
necting to Your System Over the Internet on PC or Mac, page 72.
To configure DDNS Settings:
1. Visit http://ddns.myddns-flir.com
2. From the Main Menu, click
3. Check Enable.
4. Under Domain Name, enter the Domain Name/URL Request your received in the
email after registering for DDNS.
#LX400022; r.16694/30364; en-US
and then select Network>Connection.
and register for a DDNS account.
and then select Network>DDNS.
52