Table of Contents
Advertisement
2
Write down the IP Address and HTTP Port number of the DVR.
• A local IP looks something like this: 192.168.5.118. Note that single digit numbers appear as
three digits. For example, "005" is the same as "5".
• Write down the port number beside HTTP Port.
Step 3 of 3: Connect to the DVR's Local IP Address
Follow the steps below to confirm connectivity over a local network on a PC or Mac.
To connect using the DVR's local IP address on a PC:
1
Install Client software for PC from the CD or from www.digimerge.com.
2
Double-click on the Client software for PC icon (
3
Enter the following information:
• IP Address: Enter the IP Address of your
DVR.
• User Name: The default user name is
admin.
• Password: By default, the password is
left blank.
• Client Port: By default, this is 9000.
4
Click Login to access your DVR. Client
software for PC connects to your DVR
and streams live video from your
cameras.
To connect to the DVR's local IP address on a Mac:
1
Open Safari.
2
Enter http://, the IP address of the DVR, colon, and the HTTP port number of the DVR (e.g.
http://192.168.5.118:80) into the address bar. You must include the HTTP port number of the
DVR after the address. A page appears to prompt you to install a plug-in.
Example (Connecting to a Local IP Address using Safari):
http://
Local DVR IP
Colon
HTTP Port number
Setting up your DVR for Remote Connectivity
) on your desktop.
192.168.0.101
53
Advertisement
Table of Contents
