Remote Control - FLIR Digimerge D33084T Instruction Manual

Remote Control

Remote Control
1 REC: Press to resume recording after recording has been
stopped.
• SEARCH: Press to open the Search menu.
• Number Keys (1-0): In Live Viewing Mode, press to open
the desired channel in Full-screen view. Press 1+0 for
channel 10, 1+1 for channel 11, etc.
• 0: Press 0 three times to show the mouse cursor on the
BNC monitor or the monitor connected with HDMI / VGA.
• Display Mode: In Live Viewing Mode, press repeatedly to
switch through split-screen viewing modes.
• 2x2 / 3x3 / 4x4: In Live Viewing Mode, press to open the
corresponding Split-screen View. Press repeatedly to
change channels shown in split-screen.
• AUTO: Press to start / stop Sequence Mode.
2 Navigation Cursors: Press to navigate menus.
• ENTER: In menus, press to confirm selections.
• In Live Viewing Mode, press to access System
Information.
3 MENU/ESC: Press to open the system menu. In menus,
press to go back / exit menu.
• MUTE: In Live Viewing and Playback Modes, press to mute
/ un-mute audio.
• PIP: In Live Viewing Mode, press once to open Picture in
Picture (PIP) 1X1 or twice to open PIP 1X2. Mouse is
required to change channels shown in PIP.
4 Playback Controls
• FWD: In Playback Mode, press to fast forward / increase
fast forward speed.
• REW: In Playback Mode, press to rewind / increase rewind
speed.
• PLAY: In Playback Mode, press to play / pause video.
• In Live Viewing Mode, press to open the Record Search Menu.
• STOP: In Playback Mode, press to pause playback.
• In Live Viewing Mode, press to stop recording. Password required; does not override
scheduled recording.
• SLOW: In Playback Mode, press to play video in slow motion. Press repeatedly to change slow
motion playback speed.
• PAUSE/FRAME: In Playback Mode, press to pause. Press repeatedly to view recordings frame
by frame.
10
:
1
2
3
4
5
5 PTZ Controls:
• Z+/Z- : Adjust camera Zoom.
• F+/F- : Adjust camera Focus
• I+/I-: Adjust camera Iris.
• PTZ: Opens the PTZ menu.