Changing Video Output - Ntsc & Pal; Configuring Menu Time Out And Auto Logout; Adding Users & Changing The Admin Password; Viewing System Information - FLIR Digimerge D33084T Instruction Manual

Changing Video Output - NTSC &
PAL
To change the video output:
1 In the Video Format drop-down menu,
select NTSC or PAL.
2 Click Apply to save your settings.
Configuring Menu Time Out and
Auto Logout
The Menu Time Out setting allows you
to configure how long the system menu
will remain on the screen during
inactivity. If passwords are enabled, it
also enables the Auto Logout, which
allows the system to lock itself after the
system is idle for the selected duration.
To configure Auto Logout:
1 Select the General tab. In the Menu Time
Out drop-down menu, select the desired
time before the system locks itself.
2 Click Apply to save your settings.
NOTE: You will need your system's user
name and password to unlock the
system.
Adding Users & Changing the
Admin Password
• For details on changing admin and user
passwords, see "Managing Passwords" on
page 28.
• For details on creating User accounts, see
"Adding Users" on page 29.

Viewing System Information

• Click the Info tab.

Advanced

The Advanced menu allows
you to update system
firmware, load system
defaults.
Configuring the "Auto Reboot"
feature
Auto Reboot allows the system to
restart during a specified time and date.
Restarting the system every so often
ensures system stability.
To enable the Auto Reboot feature:
1 Select the Maintain tab.
2 Configure the following:
• Auto Reboot: Select Enable or Disable to
activate or deactivate the Auto Reboot
feature.
• Reboot: In the drop down menu, select
how often the system restarts. Choose
from Every day, Every Week, or Every
Month. Enter the desired day and time you
want the system to restart.
3 Click Apply to save your settings.
Using the Main Menu
47