Configuring System Ports (Connection); Configuring Ddns Settings - FLIR M44168 Instruction Manual

16 Using the Main Menu

16.3.3 Configuring System Ports (Connection)

The Connection menu allows you to configure ports used by the system. Please note that
port forwarding is not required to use FLIR Cloud™ or to connect using the apps.
If you are using DDNS connectivity, port forwarding is required for the HTTP Port (defaut:
80) and TCP (Client Port) (default: 35000).
To configure system ports:
1. From the Main Menu, click
2. Configure the ports as needed and click OK to save changes.
NOTE
Up to 3 devices may connect to the system at the same time when using FLIR Cloud™.

16.3.4 Configuring DDNS Settings

FLIR DDNS is available as an optional connectivity option. Please see 20 DDNS Setup
(Advanced), page 146 for details.
The primary connectivity option uses FLIR Cloud™ to connect to your system over the In-
ternet without requiring port forwarding or DDNS registration. For details, see 17 Connect-
ing to Your System Over the Internet on PC or Mac, page 74.
To configure DDNS Settings:
1. Visit http://ddns.myddns-flir.com
2. From the Main Menu, click
#LX400057; r. 1.0/24460/24461; en-US
and then select Network>Connection.
and register for a DDNS account.
and then select Network>DDNS.
51