System; Changing Date Format; Changing Time Format; Changing The System Language - FLIR Digimerge D33084T Instruction Manual

Using the Main Menu
To format an eSATA hard drive:
ATTENTION: Formatting an eSATA
hard drive erases
drive. 
This step cannot be undone.
1 Connect an eSATA external hard drive to
the system.
NOTE: If you have previously used the hard
drive for another purpose, the hard
drive must be formatted as FAT32
before it will be recognized by the
DVR.
2 Right-click and select
Main Menu.
3 Click Device>HDD.
4 Click Format esata. Click OK to confirm.
NOTE: If the DVR cannot recognize the hard
drive, restart the DVR. If it still does
not recognize the hard drive, format
the hard drive using a PC to FAT32.
5 When performing backups, the DVR will
now copy data to the eSATA drive. You can
view the data on the eSATA hard drive by
connecting it to a PC or Mac.
46
all data
on the
to open the

System

The System tab allows you to
configure the system time
and user accounts.
• For instructions on how to set the system
time, including how to setup automatic
Daylight Savings Time adjustments or
NTP, see "Setting the Date and Time" on
page 16.

Changing Date Format

You can change the way the system
displays the time (i.e. Month, Day, Year)
To change the date format:
1 Select the General tab.
2 In the Date Format drop-down menu,
select the desired format. Choose from
MM/DD/YY (Month, Day, Year), YY/MM/DD
(Year, Month, Date), or DD/MM/YY (Day,
Month, Year).
3 Click Apply to save your settings.

Changing Time Format

You can change the way the system
displays the date and time format (i.e
6:00 pm or 18:00).
To change the time format:
1 Select the General tab.
2 In the Time Format drop-down menu,
select 12 Hour or 24 Hour.
3 Click Apply to save your settings.

Changing the System Language

1 In the Language drop-down menu, select
your desired system language.
2 Click Apply to save your settings.
3 Right-click until you exit the menu. Follow
the on-screen instructions to restart your
system.