Setting up your DVR for Remote Connectivity
You will need this information for remote access to your system. Record your information below:
User name:
Domain name*:
Password:
Step 3 of 4: Enable DDNS on the DVR
To enable DDNS in your DVR:
1
Right-click to open the Menu Bar and click the Main Menu button (
2
Click Network and select the DDNS tab.
3
In the DDNS drop-down menu, select Enable.
4
Under Domain Name, enter your Domain name/URL Request from the confirmation email
that was sent after you created your DDNS account.
5
Under User Name, enter your DDNS User Name that was emailed to you after DDNS
registration.
6
Under Password, enter your DDNS Device password that was emailed to you after DDNS
registration.
7
Click Apply to save your settings.
NOTE: Please allow 10~15 minutes for the DDNS servers to update with your new DDNS address
before attempting to connect.
56
tomsmith
tsmith01
******
Beside Server, select FLIRDDNS (default).
Select Enable
Select FLIRDDNS
Domain Name: Enter Domain name/URL Request
User Name: Enter DDNS User Name
Password: Enter DDNS Device password
).