Enabling Audio Recording; Configuring Recording Quality, Resolution, And Video Frame Rate - FLIR Digimerge D33084T Instruction Manual

5 (Optional): Use the bottom Copy and Copy
To drop-down to copy the recording
schedule to a specific channel or all
channels. Click Copy to copy the schedule.
6 Click Apply to save your settings.

Enabling Audio Recording

Audio-capable cameras are required
(not included) for audio recording.
To enable audio recording:
1 Click the MainStream tab.
2 Beside the corresponding channel, select
or deselect the checkbox under Audio to
enable or disable audio recording.
3 Click Apply to save your settings.
Configuring Recording Quality,
Resolution, and Video Frame Rate
You can configure the recording quality,
recording resolution and video frame
rate for each channel.
To change the recording quality,
recording resolution, and video frame
rate:
1 Click the MainStream tab.
2 Under Mode, select D1 or 960H. 960H will
enable larger, wide-screen formats.
NOTE: If you change this setting, the DVR
Audio
checkbox
Under Mode, select D1 or 960H
3 Under the Quality drop-down menu, select
from Good, Better, or Best to adjust the
quality of recordings on each channel.
4 Under the Resolution drop-down menu,
select the Recording Resolution for each
channel:
• If D1 is selected, available options are CIF
(320x240), HD1 (720x240), or D1 (720x480).
• If 960H mode is selected, available options
are 480x240, 960x240, or 960x480.
Using the Main Menu
will restart when you save changes.
Recording Recording quality
Resolution
Frames per Second
37