Basic Setup; Step 1: Connect The Bnc Cameras; Step 2: Connect The Mouse; Step 3: Connect The Ethernet Cable - FLIR Digimerge D33084T Instruction Manual

Basic Setup

Basic Setup

Step 1: Connect the BNC Cameras

• Connect BNC cameras to the Video Input ports on the rear panel of the DVR.
8-channel model shown

Step 2: Connect the Mouse

• Connect a USB mouse (included) to one of the USB ports.
8-channel model shown

Step 3: Connect the Ethernet Cable

• Connect an ethernet cable (not included) to the LAN port on the rear panel of the DVR. Connect
the other end of the ethernet cable to a router on your network.
8-channel model shown
6
Video Input
Connect ethernet cable
USB port
LAN port