Step 4 Of 4: Connect To The Ddns Address; To Connect To The Ddns Address Using The Client Software On Pc; To Connect To The Ddns Address Using Safari On Mac - FLIR Digimerge D33084T Instruction Manual

Step 4 of 4: Connect to the DDNS Address

To Connect to the DDNS Address Using the Client Software on PC:

1 Install and run the Client software for PC on a remote computer.
2 Enter the following information:
• IP Address: Enter the URL Request
followed by .myddns-flir.com. For
example, if your URL Request is
tomsmith, enter
tomsmith.myddns-flir.com
• User Name: The default user name is
admin.
• Password: By default, the password is
left blank.
• Client Port: By default, this is 9000.
3 Click Login to access your DVR. Client
software for PC connects to your DVR
and streams live video from your cameras.

To Connect to the DDNS Address Using Safari on Mac

To access your DVR remotely, enter the DDNS address that you created earlier into Safari
(Mac). The DDNS address must include http:// , the name of your DDNS URL, followed by
.myddns-flir.com, a colon, and then the HTTP port number of your DVR.
For example:
Example of a DDNS address
http://tomsmith.myddns-flir.com:80
http://
DDNS Domain name created by you
Once you have entered your DDNS address into Safari, enter the DVR user name and
password at the login screen and click Login.
NOTE: To log in remotely, the default user name is admin. The password is left blank.
Setting up your DVR for Remote Connectivity
.myddns-flir.com
HTTP Port number
Colon
57