Step 4: Connect The Monitor; Step 5: Connect The Power Adapter And Power On The Dvr - FLIR Digimerge D33084T Instruction Manual

Step 4: Connect the Monitor

• Connect an HDMI cable (not included) from the HDMI port to the TV or monitor (recommended)
OR;
• Connect a VGA cable (not included) from the VGA port to the monitor.
8-channel model shown

Step 5: Connect the Power Adapter and Power on the DVR

• Connect the included power adapter to the DC 12V port. Connect the end of the power adapter
to a wall socket or a surge protector.
• Turn the power switch to I to turn on the DVR. At startup, the system performs a basic system
check and runs an initial loading sequence. After a few moments, the system loads a live
display view.
8-channel model shown
HDMI
ON
DC 12V port
Basic Setup
VGA
7