Connectors; Table 5: Connections On Enocean Gateway - WAGO EnOcean RS-485 Manual

18 List of Figures
Pos: 24 /Alle Serien (Allgemeine Module)/Überschriften/Ebene 2/Anschlüsse - Überschrift 2 @ 4\mod_1240984262656_21.docx @ 31961 @ 2 @ 1
3.2

Connectors

Pos: 25 /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Anschlüsse/E&S/Anschlüsse 750-0940 @ 36\mod_1588777255380_21.docx @ 581738 @ 3443 @ 1
The EnOcean Gateway has the following connections:
• Connection for power supply
• Connection for signal lines
• Connection for external antenna
All connections are protected against reverse polarity.
Figure 4: Connections on EnOcean Gateway

Table 5: Connections on EnOcean Gateway

Item Description
1 2-pole PCB male header X1 for connecting power supply
2 5-pole PCB male header X2 for connecting power supply
3 SMA socket for attaching an external antenna
Figure 5: Pin assignment of the PCB male headers
Manual
Version 1.3.0, valid from FW/HW Version 01/01
750-940 EnOcean RS-485 Gateway; 868 MHz
WAGO I/O System 750