Programming The Clock; Programming The Machine's Switch-On And Switch-Off Function - Astoria 1GR Use And Maintenance Manual, Instructions For The User

Hide thumbs Also See for 1GR:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 33
1.0 BAR
09:16
(MODE) x 3 secs.
09:16 18-10-12 1
HEATING UNIT PRESSURE
1.0 BAR
AUTOMATIC STEAM WAND
USER manual
115°C
P
13-01-20 5
CLOCK SETUP
(MODE).
AUTO ON/OFF
ON 08:00
(MODE).
WORKING DAYS
1234567
(MODE)
CURR = 7
(MODE)
CUP WARMER
80 °C
(MODE)
75 °C
(MODE)
LITRE COUNTER
L = NNNNN
(MODE)
COFFEE TOTALS
NNNNN
(MODE)
LANGUAGE
ENGLISH

6.11.2 Programming the Clock

This menu is used to change the time, date and day of the
week:
• Enter the programming mode and scroll through the menu
until the following is shown on the display:
CLOCK SETUP
09:16 18-10-12 1
• Change the flashing parameter via the (+) and (-) buttons.
• Press the (ENTER) button to move on to the next param-
eter.
• To confirm the entered parameters and move on to the
next programming function, press the (MODE) button.
6.11.3 Programming the machine's
Switch-On and Switch-Off function
This menu is used to programme the machine's automatic
switch-on and switch-off procedures.
To enable this function, the switch-on time must first be set,
before setting the switch-off time.
• Enter the programming mode and scroll through the menu
until the following is shown on the display:
AUTO ON/OFF
ON 08:00
• Press the (ENTER) button to enter the menu.
• Set the machine's switch-on hour via the (+) and (-) but-
tons and then press (ENTER).
• Set the minutes of the machine's switch-on time via the
(+) and (-) buttons and then press (ENTER).
• The machine start-up settings are saved; you can then
proceed to set the switch-off time when the following ap-
pears on the display:
AUTO ON/OFF
OFF 23:00
• Set the machine's switch-off hour via the (+) and (-) but-
tons and then press (ENTER).
• Set the minutes of the machine's switch-off time via the
(+) and (-) buttons and then press (ENTER).
• To confirm the entered parameters and move on to the
next programming function, press the (MODE) button.
To disable the "AUTO ON/OFF" function, set the
time to 00:00.
53
216
of

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Comp2gr3gr4gr

Table of Contents