Programming; Sae Version - Astoria Core600 AL Use And Maintenance Manual, Instructions For The User

7.

Programming

SAE version

7.1
7.1.1 Programming the coffee dispenses
The machine is programmed by default. Should the
coffee doses need to be modified, proceed as follows:
• Always programme the right hand push-button panel
first. In this way all push-button panels get automati-
cally programmed. If necessary,
subsequently programme the
others;
• Place the cup under the dispens-
ing spout;
• Press the button for at least
5 seconds, until all the dose but-
ton LEDs are lit;
• Press the desired dose button,
for example ;
• To confirm the dose, press the
button again or the
button;
• Repeat this operation for the
other dose buttons;
• When the programming is com-
plete, press the button until
all of the LEDs on the push but-
ton panel go off.
Programming of every dose must be carried out with ground coffee
and not with previously used coffee dregs.
64 288
of
7.1.2 Programming the automatic hot water
The machine is programmed by
default. Should the hot water doses
need to be modified, proceed as
follows:
• Place the jug under the hot water
nozzle;
• Press the button for at least 5
seconds until all of the dose button
LEDs are lit;
• press the hot water button
• To confirm the dose press the
button again;
• When the programming is com-
plete, press the
all of the LEDs on the push button
panel go off.
;
button until
USER manual