Displaying And Resetting The Litre Counter; Coffee Totals; Programming The Language; Loading The Default Data - Astoria 1GR Use And Maintenance Manual, Instructions For The User

6.11.8 Displaying and resetting the litre
counter
This menu is used to display the litre counter and reset it:
• Enter the programming mode and scroll through the menu
until the litre counter is shown on the display.
LITRE COUNTER
L = NNNNN
• Press the (-) button to perform the reset.
RESET COUNTS?
PRESS FOR 3 SECS. +
• Press and hold the (+) button for at least 3 seconds to con-
firm the reset operation.
LITRES RESET
• To confirm and move on to the next programming func-
tion, press the (MODE) button.

6.11.9 Coffee totals

This menu is used to display the count of the jobs performed
by the machine:
• Enter the programming mode and scroll through the menu
until the coffee counter is shown on the display.
COFFEE TOTALS
NNNNN
• Press the (ENTER) button to enter the menu.
• Repeatedly press the (ENTER) button (the LEDs of the var-
ious buttons will light up) to view the number of selections
performed by the respective button.
• To confirm and move on to the next programming func-
tion, press the (MODE) button.
To reset the counts of the single dose buttons, proceed as fol-
lows:
• Press and hold the
button panel for at least 5 seconds.
RESET COUNTS?
PRESS FOR 3 SECS. +
• To start the reset operation, press the ( -) button.
DATA RESET
USER manual
button on the right-hand push-
• Press and hold the (+) button for at least 3 seconds to con-
firm the reset operation.
The above-indicated procedure can reset the
counts for single selections but not the machine's
total counter (machine life cycle).

6.11.10 Programming the Language

This menu is used to programme the language used to dis-
play messages on the screen:
• Enter the programming mode and scroll through the menu
until the following is shown on the display:
LANGUAGE
ENGLISH
• Set the language via the (+) and (-) buttons.
• To move on to the next programming function, press the
(MODE) button.
There is the option to choose between degrees Cel-
sius (°C) and Fahrenheit (°F) for the English lan-
guage option.

6.11.11 Loading the default data

To restore the factory settings, press and hold the buttons (1),
(3) and (7) for 5 seconds when the machine starts up.
1 3

6.12 Tips for a good cup of coffee

Wash the filters and filter holders on a daily basis, as indi-
cated in para. 7.5.3 on page 59. The failure to perform this
cleaning operation will negatively affect the quality of the
dispensed coffee.
To obtain high-quality coffee, it is important that the water
hardness does not exceed 6-7°f (French degrees). If the water
hardness exceeds these values, it is advisable to use a water
filter or softener. Avoid using a water softener if the water
hardness is less than 4°f.
If the taste of chlorine in the water is particularly strong, in-
stall a special filter.
Do not to keep large amounts of coffee beans on hand. If
you change the type of coffee, we recommend calling out
the Technician to adjust the water temperature and coffee
grinder.
If the machine has not been used for a certain period of time
(2-3 hours), perform some cycles on empty. Make sure that
the machine is constantly cleaned and periodic maintenance
is carried out.
7
55 216
of