Status Command Fields - Compaq AlphaServer DS20E Reference Manual

status
The status command displays the current system temperature, escape
sequence, power status, and whether a halt has been asserted. The following is
an example of the display. Table 6–2 explains the status command fields.
RCM>status
Firmware Rev: V2.0
Escape Sequence: ^]^]RCM
Remote Access: DISABLE
Temp (C): 26.0
RCM Power Control: ON
RCM Halt: Deasserted
External Power: ON
Server Power: ON
RCM>
Table 6–2 Status Command Fields
Item
Firmware Rev:
Escape Sequence:
Remote Access:
Temp (C):
RMC Power Control:
RMC Halt:
External Power:
Server Power:
All manuals and user guides at all-guides.com
Description
Revision of RMC firmware.
Current escape sequence to invoke RMC.
Modem remote access state. Always set to
DISABLE.
Current system temperature in degrees Celsius.
Current state of RMC system power control.
(ON/OFF)
Asserted indicates that halt is asserted with the
haltin command. Deasserted indicates that halt
has been released.
Current state of power to RMC. Always on.
Indicates whether power to the system is on or
off.
Remote Management Console 6-13