7.15 Updating Firmware
Use the lfu command to update firmware.
typical update from floppy. You may need two floppies, depending on
whether you want to update option firmware. For more information on
updating firmware, see Chapter 5 of this manual and the Alpha
Systems Firmware Web site.
Example 7–13 Updating Firmware from Floppy
P00>>>lfu
Checking dka500.5.0.2000.1 for the option firmware files. . .
dka500.5.0.2000.1 has no media present or is disabled via the RUN/STOP switch
Checking dva0 for the option firmware files. . .
Option firmware files were not found on CD or floppy.
If you want to load the options firmware,
please enter the device on which the files are located(ewa0),
or just hit <return> to proceed with a standard console update: dva0
Please enter the name of the options firmware files list, or
Hit <return> to use the default filename (pc264fw.txt)
Copying pc264fw.txt from dva0. . .
Copying PC264SRM from dva0. . .
Copying PC264NT from dva0. . .
Please insert next floppy containing the options firmware,
Hit <return> when ready. Or type DONE to abort.
Copying PC264FSB from dva0. . .
Copying CCMAB022 from dva0. . .
Copying DFXAA310 from dva0. . .
Copying KZPSAA12 from dva0. . .
Copying CIPCA420 from dva0. . .
***** Loadable Firmware Update Utility *****
-----------------------------------------------------------------------------
Function
Description
-----------------------------------------------------------------------------
Display
Displays the system's configuration table.
Exit
Done exit LFU (reset).
List
Lists the device, revision, firmware name, and update revision.
Readme
Lists important release information.
Update
Replaces current firmware with loadable data image.
Verify
Compares loadable and hardware images.
? or Help
Scrolls this function table.
-----------------------------------------------------------------------------
7-32
DS20E Reference Guide
All manuals and user guides at all-guides.com
Example 7–13 shows a
:
Need help?
Do you have a question about the AlphaServer DS20E and is the answer not in the manual?