Rmc Switch Pack; Rmc Switch Pack Defaults - Compaq AlphaServer DS20E Reference Manual
Hide thumbs
Also See for AlphaServer DS20E:
- Technical manual (16 pages) ,
- Reference manual (280 pages) ,
- Reference manual (300 pages)
Table of Contents
Advertisement
6.7
RMC Switch Pack
The RMC operating mode is controlled by a switch pack on the server
feature module, illustrated in Chapter 1. Use the switches to enable or
disable certain RMC functions, if necessary.
numbered on the SFM, as shown in Figure 6–2.
Figure 6–2 RMC Switch Pack Defaults
NOTE: Under normal circumstances, leave all switches in the default position.
Switch 2 is reserved and its setting should never be changed.
The PIC refers to the RMC microprocessor.
6-14
DS20E Reference Guide
All manuals and user guides at all-guides.com
1
(RMC) PIC Enable
2
Reserved for service
3
PIC SYSPWR Enable
4
Load PIC Defaults
The switches are
PK1216e
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the AlphaServer DS20E and is the answer not in the manual?
Questions and answers