Changing A Switch Setting - Compaq AlphaServer DS20E Reference Manual

6.7.1

Changing a Switch Setting

WARNING: To prevent injury, access to internal components is
limited to persons who have appropriate technical training and
experience. Such persons are expected to understand the
hazards of working within this equipment and take measures to
minimize danger to themselves or others. These measures
include:
1. Remove any jewelry that may conduct electricity.
2. Wear an antistatic wrist strap when handling internal
components.
To change an RMC switch setting:
5. Shut down the operating system and turn off the system power.
6. Unplug the AC power cord.
NOTE: If you do not unplug the power cord, the new setting will not take
effect when you power up the system.
7. Remove the system covers.
8. Locate the RMC switch pack on the server feature module (see Chapter 1)
and change the switch setting as needed.
9. Replace the system covers and plug in the power cord.
6-16 DS20E Reference Guide
All manuals and user guides at all-guides.com