Compaq AlphaServer DS20E Reference Manual page 65

The sliding segment of the slide has an access hole
three mounting holes in the stationary segment. You use two of the mounting
holes.
Front
1. Insert a cap screw through the access hole
mounting hole
Fasten with one two-hole nut bar
2. Align the access hole with the third mounting hole
3. Insert a cap screw through the access hole and the third hole
and through the slot
tighten.
Back
4. Insert a screw through the two holes
slide and through a slot in the slide bracket. Attach to a two-hole nut
.
bar
Repeat the entire procedure for the other slide.
All manuals and user guides at all-guides.com
in the slide and through the hole
and tighten.
in the slide bracket. Fasten through the nut bar and
Installing the Rackmount System 3-11
that provides access to
and the first (forward-most)
in the slide bracket.
in the slide.
in the stationary segment of the
in the slide