Compaq AlphaServer DS20E Reference Manual page 201

Procedure for Updating from Floppy
1. Copy the firmware files, as described on the Alpha Systems Firmware Web
site.
2. Insert disk1 into the floppy drive on the system and enter the lfu command
from SRM.
3. The update utility runs and says that files were not found on CD or floppy,
but then asks on which device the files are located. Type dva0.
4. The LFU then prompts for the name of the firmware files list. Press Return.
The default file, pc264fw.txt, will be on the floppy.
5. The LFU reports as it copies each file. When the three files on disk1 are
copied, the LFU prompts for the next floppy.
6. If you have disk2, insert it and press Return; otherwise type done.
All manuals and user guides at all-guides.com
Continued on next page
Using the SRM Console 7-33