Compaq AlphaServer DS20E Reference Manual page 129

Installing Drives
1. Insert the drive carrier into the cage with the front handle
With the carrier resting on top of the rail guides of the cage, slide the carrier
in until it stops.
2. Push the handle
into the cage.
Removing Drives
1. To remove the carrier, press the colored rubber button
handle.
2. Pull the handle
drive out of the cage.
Verification
If you hot-swapped a drive, the Activity LED on the new drive flashes when the
drive is inserted. If the system was powered off when you installed the drive,
the LED flashes on system power-up.
Also, use the show device command to verify that the system sees the new
drive.
All manuals and user guides at all-guides.com
in to make the backplane connection and to secure it
forward to release the SCSI connection and then pull the
Configuring and Installing Components 5-23
fully open.
in to release the