Compaq AlphaServer DS20E Reference Manual page 224

7.23.1 com*_baud
The default baud rate for the system is 9600.
commands set the baud rate for COM1 and COM2.
com1_baud
The com1_baud environment variable sets the baud rate for the internal
COM1 serial interface.
com2_baud
The com2_baud environment variable sets the baud rate to match that of the
device connected to the COM2 port.
The syntax is:
set com*_baud baud_value
baud_value The new baud rate. A list of possible values is displayed by
entering the command without a value.
Example
The following example shows the supported baud rate values.
P00>>> set com2_baud
57600
38400
19200
9600
7200
4800
3600
2400
2000
1800
.
.
.
7-56 DS20E Reference Guide
All manuals and user guides at all-guides.com
The com*_baud