Installing And Removing Dimms - Compaq AlphaServer DS20E Reference Manual

5.4.1

Installing and Removing DIMMs

Before installing DIMMs, shut down the operating system, turn off
power to the system, and unplug the power cord. Remove the side
cover (pedestal) or top cover (rackmount) and attach an antistatic
wrist strap.
Figure 5–5 Installing DIMMs
1
1. Release the latching clips
2. Align the pins of the DIMM with the connector and seat the DIMM firmly in
the connector.
3. Secure the DIMM with the latching clips.
4. Replace the side cover (pedestal) or top cover (rackmount).
Verification
1. Turn on power to the system.
2. At the SRM prompt, issue the show memory command to display the
amount of memory in each bank and the total amount of memory in the
system.
5-8 DS20E Reference Guide
All manuals and user guides at all-guides.com
on the memory connector on the system board.
CAT0124