11. Slide the cage in the rest of the way and attach it with the four screws saved
from the drive cage removal or filler plate removal.
12. Close the power supply door and tighten the captive fasteners.
13. Replace the side cover (pedestal) or top cover (rackmount) and tighten the
captive screw to secure the cover.
14. Install hard drives.
15. Plug in the power cord.
Verification
1. Turn on power to the system.
2. At the P00>>> prompt, enter the SRM show device command to display
the devices and controllers in the system. The list should include the SCSI
controller and disk drives that you installed.
5-34
DS20E Reference Guide
All manuals and user guides at all-guides.com
Need help?
Do you have a question about the AlphaServer DS20E and is the answer not in the manual?