11
Information
RESET ALL SETTINGS
In the event that a mistake was made and one or more changes should not have been made with the handset, the
speed controller settings can be reverted to the original settings from the beginning of the session (when the handset
was plugged into the vehicle). This function is similar to the "undo" command on a PC and will work correctly only
when the handset has not been unplugged and power to the speed controller has not been interrupted.
Resetting All Settings
1.
During an active session when the settings need to be returned to the original values (the values that were active
at the beginning of the session), scroll to the functions menu and select.
2.
Select settings.
3.
Select reset all settings.
4.
Press "+" on the change value button to confirm the operation.
5.
The handset will display an "executing..." message for the next few seconds while the controller settings are being
stored in the handset's memory (Figure 11-4, Page 11-16).
6.
When the handset is finished resetting the speed controller settings, a confirmation message is displayed (Figure
11-7, Page 11-17).
INFORMATION
The information menu is accessed by using the up or down arrow to scroll to information and pressing the right
arrow key to activate the menu.
This menu selection displays information pertaining to the speed controller. The information provided from this
menu selection includes:
MODEL NUMBER
Displays the model number of the speed controller.
SERIAL NUMBER
Displays the serial number of the speed controller.
MFG DATE
Displays the date the speed controller was manufactured.
SOFTWARE VERSION
Displays the speed controller software version. See following NOTE.
NOTE: This manual spans software releases version 14 and version 15.
Page 11-18
2014 Precedent
®
Golf Car Maintenance and Service Manual
IQ DISPLAY MODULE (IQDM) AND IQDM-P
DIAGNOSTICS: EXCEL SYSTEM WITH
POWERDRIVE CHARGER