Forward Input; Reverse Input; Charger Inhibit; Main Cont Driver - Club Car Precedent 2014 Maintenance And Service Manual

Table of Contents

Advertisement

IQ DISPLAY MODULE (IQDM) AND IQDM-P
DIAGNOSTICS: EXCEL SYSTEM WITH
POWERDRIVE CHARGER

FORWARD INPUT

With the Forward/Reverse switch in the NEUTRAL or REVERSE position, the handset should indicate that the
forward input is off. When the Forward/Reverse switch is placed in the FORWARD position, the handset should
indicate that the forward input is on.

REVERSE INPUT

With the Forward/Reverse switch in the NEUTRAL or FORWARD position, the handset should indicate that the
reverse input is off. When the Forward/Reverse switch is placed in the REVERSE position, the handset should
indicate that the reverse input is on.

CHARGER INHIBIT

Displays charger connection. When the controller energizes the solenoid coil, the handset indicates ON. When the
controller de-energizes the solenoid coil, the handset indicates OFF. Current controller software versions, up to version
15, does not allow operator to view IQDM while DC cord is plugged into the vehicle.

MAIN CONT DRIVER

Displays the present solenoid (main contactor) state. When the charger is connected and the controller does not drive
(inhibited), the handset indicates ON. When the charger is not connected and the controller is allowed to drive, the
handset indicates OFF.

PASSWORD TRIES (IQDM-P ONLY)

A password is required to place the vehicle in "private speed mode" (speed setting 4). The speed controller will log
unsuccessful and unauthorized attempts to place the speed controller in "private speed mode". If repeated attempts
are unsuccessful, the speed controller will permanently lock out access to "private speed mode". In the event that
"private speed mode" is locked out, the controller must be removed and shipped to Club Car before it can ever be
placed in "private speed mode". See Code A, Code B, and Code C on page 12-4.

ODOMETER

Displays approximate distance travelled in miles.

VEHICLE SPEEDS (IQDM-P ONLY)

Press right arrow to display programmed speeds for each speed setting. See Code A, Code B, and Code C on
page 12-4.
2014 Precedent
®
Golf Car Maintenance and Service Manual
11
Monitor Menu
Page 11-7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents