Monitor Menu; Speed; Throttle; Batt Aux Voltage - Club Car Precedent 2014 Maintenance And Service Manual

IQ DISPLAY MODULE (IQDM) AND IQDM-P
DIAGNOSTICS: EXCEL SYSTEM WITH
POWERDRIVE CHARGER

MONITOR MENU

The monitor menu is accessed by using the up or down arrow to scroll to monitor and pressing the right arrow key
to activate the menu. All information in the monitor menu is updated in real time, allowing the trained technician to
troubleshoot the vehicle by monitoring the handset as the key switch is cycled, Forward/Reverse switch is activated,
etc. See following NOTE.
NOTE: Values appearing in these menus represent approximate measurements made by the controller and may differ
from measurements made by external instruments.
Since the monitor menu is updated while the vehicle is in operation, the trained technician has the ability to monitor
the status of several components in conditions or locations where a problem with vehicle performance has been
reported. See following WARNING.
WARNING
• The vehicle operator should not monitor the handset while the vehicle is in motion. A technician
can monitor the handset while traveling as a passenger in the vehicle. Failure to heed this warning
could result in severe personal injury or death.
The following parameters can be monitored in real time with the handset from the monitor menu:

SPEED

Vehicle speed in mph. Only visible with the IQDM-P.

THROTTLE

Indicates the position of the accelerator pedal from 0% (pedal not pressed) between 95% and 100% (pedal fully
pressed). This item can be monitored when the key switch is in the ON or OFF position.

BATT AUX VOLTAGE

Displays the current battery voltage at the speed controller.

TEMPERATURE

Displays the temperature (in degrees Celsius) of the speed controller heatsink. During normal operating conditions, the
heatsink temperature should be below 185 °F (±9) (85 °C (±5)). See following NOTE.
NOTE: Anything that adds resistance (i.e. improper brake adjustment, low air pressure in tires, low battery voltage,
etc.) can cause the operating current to be higher than normal. This higher current increases the temperature
of the speed controller heatsink.
2014 Precedent ® Golf Car Maintenance and Service Manual
11
Monitor Menu
Page 11-5