Menu Navigation; Program (Iqdm-P Only); Monitor; Faults - Club Car Precedent 2014 Maintenance And Service Manual

IQ DISPLAY MODULE (IQDM) AND IQDM-P
DIAGNOSTICS: EXCEL SYSTEM WITH
26

Menu Navigation

ERIC CHARGING
MENU NAVIGATION
The NAVIGATION BUTTON (1) is the four-arrow button located on the left side of the handset (Figure 26-3, Page
26-3). This button is used to navigate through and select menus. Pressing the up or down arrows allows the user to
scroll through the menu items. When the box beside the desired menu is blinking, pressing the right arrow selects that
menu item. Pressing the left arrow allows the user to go back one screen (2).
The CHANGE VALUE BUTTON (3) is the button located on the right side of the handset (Figure 26-3, Page 26-3).
This button allows the user to change values by pressing "+" or "–".
The three yellow buttons labeled 1, 2 and 3 are BOOKMARK BUTTONS (4) (Figure 26-3, Page 26-3). These buttons
allow the user to bookmark up to three specific screens for rapid return to those screens. To bookmark a specific
display screen, have the desired screen displayed and simply press and hold a bookmark button until the statement
"bookmark set" is displayed. When it is necessary to go back to the bookmarked screen, rapidly press and release the
appropriate bookmark button. See following NOTE.
NOTE: When going to a bookmarked display screen, be sure to rapidly press and release the button. If the button is
pressed and held for too long, the bookmark will be overridden with the current screen.
The three yellow buttons also allow for quicker input of serial number and car decal number. Press and hold "+" or "–"
while holding buttons 1, 2 or 3 to accelerate a number search.
The following menus are accessible on the IQDM handset:

PROGRAM (IQDM-P ONLY)

The program menu allows the user to view and change custom speed controller settings. See Program Menu on
page 27-2.

MONITOR

The monitor menu displays values for certain parameters to facilitate speed controller troubleshooting. See Monitor
Menu on page 26-5.

FAULTS

The faults menu displays all faults recorded by the speed controller since the history was last cleared. Each fault is
listed only once, even if the fault has occurred multiple times. See Faults Menu on page 26-9.

FUNCTIONS

The functions menu allows the user to transfer all current settings from the speed controller to the handset and from
the handset to the speed controller. See Functions Menu on page 26-16.
Page 26-4 2014 Precedent ® Golf Car Maintenance and Service Manual